Bullet Sensors & Transducers e-Digest, Vol. 176-177, Issue 8, August 2014: Products News

    (ISSN 1726-5479)

 

 

Editorial Calendar

Editorial Board

Submit an Article

Submit a White Paper

Submit Press Release

Best Selling Articles 2012

Top 25 Downloaded Article

10 Top Sensors Products of 2012

Best_Articles_2011

Journal Subscription

E+E Elektronik logo

 

 

Submit Press Release

 

or / and

 

White Paper

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents

2004 S&T e-Digest Contents

2005 S&T e-Digest Contents

2006 S&T e-Digest Contents

2007 S&T e-Digest Contents

2008 S&T e-Digest Contents

2009 S&T e-Digest Contents

2010 S&T e-Digest Contents

2011 S&T e-Digest Contents


 

 

New Miniature Air Flow Transmitter for HVAC

 

 

Engerwitzdorf, 27.08.2014 - The new transmitter EE671 measures air velocity up to 20 m/s. Thanks to its compact design it is ideal for mass applications in HVAC. The flow sensing element sets new standards in terms of accuracy and resistance to pollutants.

 

The built-in VTQ flow sensing element based on thin-film technology works on the hot-film anemometer principle. Thanks to its innovative design - made possible by the use of the latest transfer molding technology - the sensor is particularly resistant to contamination. A high reproducibility of the sensor characteristics, fast response time, low angle dependence and excellent long-term stability are further advantages of the high-quality sensing element.

 

The EE671 is available with cable or plug connection. An alignment strip on the probe and matching mounting flange simplifies installation and ensures proper alignment of the sensor. The flange enables the immersion depth to be infinetly variable.

 

The measured air velocity is available as linear voltage output (optional 0-1V, 0-5V or 0-10V). The digital interface in combination with a configuration kit allows the customer to set the measurement range, to configure the output signal and to adjust the transmitter.

 

The EE671 is suitable for use in heating and ventilation systems, for flow monitoring and control or for inlet air monitoring in ovens.

 

 

About E+E Elektronik

 

E+E Elektronik GmbH, with headquaters in Engerwitzdorf/Austria, belongs to the Dr. Johannes Heidenhain GmbH group. With around 250 employees, E+E develops and manufactures sensors and transmitters for relative humidity, CO2, air velocity and flow as well as humidity calibration systems. The main E+E markets are HVAC, process control and automotive. With an export share of around 97 % E+E has branch offices in China, Germany, France, Italy, Korea and the USA as well as an international dealer network. Aside from operating its own accredited calibration laboratories, E+E Elektronik has been appointed by the Austrian Federal Office for Calibration and Measurement (Bundesamt für Eich- und Vermessungswesen; BEV) as a designated laboratory to supply the national standards for humidity and air velocity.

 

 

 

 

 

 

 

 

.

Contact:

 

Mr. Johannes Fraundorfer,

E+E Elektronik GmbH

Langwiesen 7 A-4209

Engerwitzdorf Austria,

Tel.: +43 (0) 7235 605-0

Fax: +43 (0) 7235 605-8

E-mail: johannes.fraundorfer@epluse.at

http://www.epluse.com

 

 

 

 

Digital Sensors and Sensor Sysstems

 

 

 

Handbook of Laboratory Measurements

 

 

Back to S&T e-Digest page

 


1999 - 2014 Copyright ©, International Frequency Sensor Association (IFSA). All Rights Reserved.