Bullet Sensors & Transducers e-Digest, Vol. 74, Issue 12, December 2006: Product News

    (ISSN 1726- 5479)

 

Top 25 Downloaded Article

Editorial Calendar 2007

Editorial Calendar 2006

Editorial Board

Submit an Article or Press Release

AST logo

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents

2004 S&T e-Digest Contents

2005 S&T e-Digest Contents


 

 

Submersible Pressure Sensors for Level Sensing Needs

 

 

Mt. Olive, NJ - November 30, 2006 - American Sensor Technologies, Inc. (AST) introduces a new line of Media Isolated Submersible Pressure Sensors - the Models AST4500 and AST4510. These units are intended for use in intrinsically safe IS areas when used with an approved entity barrier. Constructed of all stainless steel, the AST4500 and AST 4510 sensors are approved to UL/cUL 913 (CSA) Class 1 Div 1, Groups C and D. In addition, each sensor holds a CE Approval of EN 61326.

 

Both the AST4500 and AST4510 are extremely versatile and suitable in a variety of different submersible and level measurement applications including: ground water level depth measurement, well water monitoring, earthen and concrete dams, liquid level tanks, gasoline and diesel fuel tanks, irrigation, salt water holding tanks and waste water canals.

 

The AST4500 and AST4510 share a number of important features.  Each sensor can be submerged in liquids that are compatible with 304 SS, 316L SS and Hytrel cable. The Hytrel cable is available in various lengths to meet current industry demands. Both models offer a weighted front-end nose cone and are designed to survive in harsh environments. The AST4500 and AST4510 contain no internal O-rings, taking the guesswork out of O-ring to media compatibility. Each sensor is equipped with 100V/m of EMI/RFI protection from electrical noise.

 

Both models operate at a wide temperature range -20 to 85*C (4 to 185*F) and offer pressure ranges up to 100 PSI. More specifically, the AST4500 series provides pressure ranges from 0-20 to 0-100 PSIG and an 0.88 inch diameter. For the AST4510 series, 0-5, 0-7.5, 0-10 and 0-15 PSIG are the ranges offered with a one inch diameter. Output options include: 1-5 V, and 4-20 mA.

Submersible Pressure Sensor

   

Contact:

 

Karmjit Siddhu

American Sensor Technologies, Inc.

450 Clark Drive, Mt. Olive, NJ 07828, USA

Tel.: 973-448-1901, fax: (973) 448-1905

E-mail: ksiddhu@astsensors.com

 

 

Back to S&T e-Digest page

 


1999 - 2006 Copyright ©, International Frequency Sensor Association (IFSA). All Rights Reserved.