Bullet Sensors & Transducers e-Digest, Vol. 183, Issue 12, December 2014: Products News

    (ISSN 1726-5479)

 

 

Editorial Calendar

Editorial Board

Submit an Article

Submit a White Paper

Submit Press Release

Best Selling Articles 2012

Top 25 Downloaded Article

10 Top Sensors Products of 2012

Best_Articles_2011

Journal Subscription

E+E Elektronik logo

 

 

Submit Press Release

 

or / and

 

White Paper

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents

2004 S&T e-Digest Contents

2005 S&T e-Digest Contents

2006 S&T e-Digest Contents

2007 S&T e-Digest Contents

2008 S&T e-Digest Contents

2009 S&T e-Digest Contents

2010 S&T e-Digest Contents

2011 S&T e-Digest Contents


 

 

Omniport 30 Hand-held Transmitter for CO2

 

 

(Engerwitzdorf, 17.12.2014) - Now available for the Omniport 30 hand-held transmitter from E+E Elektronik is a CO2 probe with a measurement range of 0…2000 / 5000 / 10,000ppm. This means that the device can be used for ambient air monitoring or for CO2 leak localization. Other E+E probes for humidity, temperature and air velocity and the integrated air pressure sensor make the Omniport 30 a universal transmitter for a variety of applications. A total of up to 23 different measurements can be recorded and stored.

 

The new CO2 probe is based on the NDIR dual wave length procedure and was developed specifically for demanding applications. Auto calibration and temperature compensation ensure long-term stability and high precision measurement results. The CO2 probe can also be calibrated directly on-site via the hand-held transmitter.

 

The Omniport 30 offers continuous and single-point data logging with time stamp. Up to three measurements can be displayed simultaneously on the large, easy to read TFT display. The data can also be displayed in the form of graphs. The intuitive menu guidance and touchscreen navigation make operating the hand-held transmitter easy and user friendly.

 

The internal memory of the Omniport 30 provides space for up to 2 million measurement values that can be transferred to a PC via USB interface. Complimentary data management software is available to carry out further analysis and archiving. Software updates can also be carried out via the USB interface.

 

A practical transport case is available for safe storage of the hand-held transmitter, including sensing probes and accessories.

 

 

About E+E Elektronik

 

E+E Elektronik GmbH, with headquaters in Engerwitzdorf/Austria, belongs to the Dr. Johannes Heidenhain GmbH group. With over 250 employees, E+E develops and manufactures sensors and transmitters for relative humidity, CO2, air velocity and flow as well as humidity calibration systems. The main E+E markets are HVAC, process control and automotive. With an export share of around 97 % E+E has branch offices in China, Germany, France, Italy, Korea and the USA as well as an international dealer network. Aside from operating its own accredited calibration laboratories, E+E Elektronik has been appointed by the Austrian Federal Office for Calibration and Measurement (Bundesamt für Eich- und Vermessungswesen; BEV) as a designated laboratory to supply the national standards for humidity and air velocity.

 

 

 

 

 

 

.

Contact:

 

Mr. Johannes Fraundorfer,

E+E Elektronik GmbH

Langwiesen 7 A-4209

Engerwitzdorf Austria,

Tel.: +43 (0) 7235 605-0,

Fax: +43 (0) 7235 605-8

E-mail: johannes.fraundorfer@epluse.at

Web: http://www.epluse.com

 

Omniport 30 Hand-held Transmitter for CO2

Sensors Web Portal's logo

 

 

 

 

Gas Sensors

 

 

 

 

 

Handbook of Laboratory Measurements

 

 

Back to S&T e-Digest page

 


1999 - 2014 Copyright ©, International Frequency Sensor Association (IFSA). All Rights Reserved.