Bullet Sensors & Transducers e-Digest, Vol. 185, Issue 2, February 2015: Products News

    (ISSN 1726-5479)

 

 

Editorial Calendar

Editorial Board

Submit an Article

Submit a White Paper

Submit Press Release

Best Selling Articles 2012

Top 25 Downloaded Article

10 Top Sensors Products of 2012

Best_Articles_2011

Journal Subscription

E+E Elektronik logo

 

 

Submit Press Release

 

or / and

 

White Paper

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents

2004 S&T e-Digest Contents

2005 S&T e-Digest Contents

2006 S&T e-Digest Contents

2007 S&T e-Digest Contents

2008 S&T e-Digest Contents

2009 S&T e-Digest Contents

2010 S&T e-Digest Contents

2011 S&T e-Digest Contents


 

 

HVAC Humidity & Temperature Transmitter for Duct Mounting

 

 

(Engerwitzdorf, 23.02.2015) - The new EE150 humidity & temperature transmitter has been optimized specifically for use in the HVAC and building technology sectors and impresses with an outstanding price/performance ratio. The clever housing concept, the compact design and the  6mm probe simplify mounting of the transmitter, which results in minimized installation costs. The IP65/NEMA 4 enclosure provides optimal protection of the electronics and the capacitive E+E humidity sensor element guarantees long-term stable measurement results.

 

The EE150 features a particularly installation-friendly design. Thanks to the external mounting holes it is not necessary to open the housing for mounting. This means that the electronics are protected against construction site pollution. For duct mounting the RH/T probe of just 6mm in diameter does not require a hole any larger than a standard T probe. The mounting flange further simplifies installation of the transmitter. The benefits are shorter mounting times and thus minimized installation costs.

 

The PTFE filter cap protects the sensing head against contamination, ensuring excellent long-term stability. The measured values are issued via two 0-10 V or 4-20 mA analog outputs. Using an optional configuration kit and the free software, the user can set the output scaling and perform a 1 or 2 point adjustment for humidity and temperature.

 

 

About E+E Elektronik

 

E+E Elektronik GmbH, with headquaters in Engerwitzdorf/Austria, belongs to the Dr. Johannes Heidenhain GmbH group. With over 250 employees, E+E develops and manufactures sensors and transmitters for relative humidity, CO2, air velocity and flow as well as humidity calibration systems. The main E+E markets are HVAC, process control and automotive. With an export share of around 97% E+E has branch offices in China, Germany, France, Italy, Korea and the USA as well as an international dealer network. Aside from operating its own accredited calibration laboratories, E+E Elektronik has been appointed by the Austrian Federal Office for Calibration and Measurement (Bundesamt fr Eich- und Vermessungswesen; BEV) as a designated laboratory to supply the national standards for humidity and air velocity.

 

 

 

 

 

 

 

 

 

 

.

Contact:

 

Mr. Johannes Fraundorfer,

E+E Elektronik GmbH

Langwiesen 7 A-4209

Engerwitzdorf Austria,

Tel.: +43 (0) 7235 605-0,

Fax: +43 (0) 7235 605-8

E-mail: johannes.fraundorfer@epluse.at

Web: http://www.epluse.com

 

Humidity & Temperature Transmitter EE150

Temperature Sensors

 

 

Humidity Sensors

 

 

 

 

Handbook of Laboratory Measurements

 

 

Back to S&T e-Digest page

 


1999 - 2015 Copyright , International Frequency Sensor Association (IFSA). All Rights Reserved.