Sensors & Transducers e-Digest, Vol. 58, Issue 8, August 2005: Product News
(ISSN 1726- 5479)
ATEX / CSA Intrinsically Safe Vibration Transmitters
August 4, 2005, Depew, NY-The IMI Sensors Division of PCB Piezotronics, Inc. introduces a new line of 4 to 20 mA vibration transmitters with intrinsic certifications for monitoring of critical machines. These intrinsically safe sensors comply to ATEX and CSA North American standards and are used to monitor critical rotating machinery in refineries, grain processing facilities, or mines where hazardous gas or dust may be present, thus requiring this safety certification.
The 4 to 20 mA transmitters are loop powered and can be conveniently interfaced with existing plant monitoring equipment such as PLC, DCS, or SCADA systems. Standard features include hermetic sealing, frequency response from 180 to 600,000 cpm (3 to 10 kHz), stainless steel construction, Вј-28 or M6 mounting hardware, temperature 40 to +185 °F (-40 to +85 °C). Standard sensors provide the choice of acceleration or velocity output signals and in either RMS or peak versions. Optional temperature or analog output is available. The analog vibration option gives a technician the ability to perform detailed signal analysis.
For additional information, contact the IMI Sensors Division of PCB Piezotronics, Inc. toll-free at 800-959-4464 (in the U.S. and Canada) or 716-684-0003, fax 716-684-3823, e-mail: imi@pcb.com, or visit our website at www.imi-sensors.com
Technical:
Eric Yax, Division Manager IMI Sensors Division 3425 Walden Avenue, Depew, NY 14043-2495 Tel: (800) 959-4464 ext. 2377, fax: (716) 684-3823 E-mail: eyax@pcb.com |
|
|
|
||
General / Sales Leads:
Andrea Mohn, Marketing Coordinator PCB Piezotronics, Inc. 3425 Walden Avenue Depew, NY 14043-2495 Tel.:(800) 828-8840 ext. 2216, fax: (716) 684-0987 E-mail: mktg@pcb.com |
1999 - 2005 Copyright ©, International Frequency Sensor Association (IFSA). All Rights Reserved.