Bullet Sensors & Transducers e-Digest, Vol. 71, Issue 9, September 2007: Product News

    (ISSN 1726- 5479)

 

Top 25 Downloaded Article

Submit an Article or Press Release

Flow Research logo

2000-2002 S&T e-Digest Contents

2003 S&T e-Digest Contents

2004 S&T e-Digest Contents

2005 S&T e-Digest Contents


 

 

Flow Research Study Finds Shift to Non-Contact Temperature Sensors

 

Wakefield, Massachusetts — A new research study finds several important shifts occurring in the temperature sensor market. The study, called The Market for Temperature Sensors in the Americas, 2nd Edition, was researched and published by Flow Research. The temperature sensor market in the Americas totaled $620 million in 2005, according to this study. Revenues from sales of temperature sensors in the Americas are projected to increase at a compound annual growth rate (CAGR) of 4.2 percent through 2010, when they are expected to reach $760 million.

 

One important technology change is the shift away from contact temperature measurement to non-contact measurement. This involves a shift away from thermocouples, RTDs, and thermistors to infrared thermometers and fiber-optic temperature sensors. Infrared thermometers are a form of non-contact temperature measurement, while fiber-optic temperature sensors have both contact and non-contact varieties 

 

In addition to the shift towards non-contact temperature sensors, there is a broader shift away from thermocouples. Thermocouples typically are less accurate and stable than RTDs and thermistors. End-users who wish to achieve greater accuracy and stability in their temperature measurements can either switch to a different type of contact sensor, such as an RTD or thermistor, or can go to a different technology altogether such as infrared or fiber optic. Some temperature measurements, such as the temperature of moving objects, cannot be made by contact methods. Even so, thermocouples do maintain some advantages in high temperature environments, and they are still the most widely used method of temperature measurement in industrial markets.

 

According to Dr. Jesse Yoder, president of Flow Research, other changes are occurring as well.  “It is interesting to compare the temperature market today to the temperature market of 2000.  Some changes that were going on then are still occurring now, like the shift from wirewound to thin-film RTDs.  But other changes are occurring, like the development of fiber-optic temperature sensors and the further development of infrared thermometers.  In addition, a great deal of consolidation has occurred in this market.”

 

Temperature sensors growth

   

CAGR = 4.2 Percent

 

Contact:

 

Jesse Yoder,

Flow Research, Inc.

27 Water Street, Wakefield, MA 01880

Tel.:(781) 245-3200, fax: (781) 224-7552

E-mail: jesse@flowresearch.com

 

 

Back to S&T e-Digest page

 


1999 - 2006 Copyright ©, International Frequency Sensor Association (IFSA). All Rights Reserved.