Water Sensors
Water Sensors
|
|
Price: US $ 145.00 15 Foot Humidity Sensor Price: US $ 165.00 60 Foot Humidity Sensor Price: US $ 225.00 100 Foot Humidity Sensor |
|
Shipping Policy
Sipping Charges |
US Shipments |
|
Shipping cost for a sensorProbe is $ 20.00 Every additional sensorProbe is $ 10.00 Every additional sensor is $ 5.00 |
The DC adapter is included for free AKCP pays all taxes and customs duties |
Non US Shipments |
For EU Countries |
|
The sensorProbe uses an external country specific DC adapter. There is an additional $10 charge for this adapter. The customer pays all taxes |
There is an additional charge of $10 for all shipments of the sensorProbe to help offset the high costs of regulatory approvals. |
Product Description
The water detector is an advanced microprocessor based design capable of detecting distilled water. This water detector is designed and manufactured by AKCP. It is an exclusive design capable of detecting the presence of even distilled water. The water detector contains microprocessor controlled capacitance measuring circuitry. This is far more precise than standard commercially available water detectors which measure the resistance of water. The resistance of water can vary depending upon the impurities in the water. Normal resistance type monitors are unable to detect the presence of distilled water due to its high resistance. The entire circuit is encased in epoxy allowing the water detector to function while submerged in water.
The SP2 will retain any error condition until it is read via an snmp get. Therefore if a water detector encounters a critical condition at any time it will report that condition before it returns to a normal state.
The water senor detects water leaks and flooding with a WET/DRY indication in software. SNMP polling via snmp get available. Web browser interface available. When an alarm condition is activated the description and location of the fault can be sent via e-mail, page.
Specification and Features
Measurement range - Wet or Dry ( -20°C +60°C).
Measurement accuracy - able to measure distilled water.
Sensor type - patent pending, microprocessor controlled, capacitance measurement technology.
Power source: powered by the sensorProbe. No additional power needed.
Communications cable - RJ45 jack to sensor using UTP Cat 5 wire, maximum extension cable length 305m (1000 ft.) with approved low capacitance shielded cable or UTP.
sensorProbe autodetects the presence of the water detector.
Measurement rate - multiple readings every second.
sensorProbe autodetects the presence of the sensor.
Up to 2 water detectors per sensorProbe.
Full autosense including disconnect alarm.
1999 - 2003 Copyright ©, International Frequency Sensor Association (IFSA). All Rights Reserved.
