Temperature
Module for
Measurement/Control
VEK8067
Use this temperature module to interface to a display or control system that accepts an analog voltage or current input. Applications : measure indoor and outdoor temperatures, control heating and/or cooling of rooms, equipment,
etc. Monitor temperatures in processes, put a temperature readout on your website, check your pools temperature.
Range: -20° ~ +70°C, accuracy: 2° full range.
|
4
Channel Temperature Logger,
CK110
PC controlled 4 channel temperature meter (either deg C or F) using the serial port, 4 x DS1820
Dallas temperature sensors. No external power required (powered by computer serial port).
Each DS1820 may be located over 200 meters away from the motherboard and PC.
Accuracy - +/- 0.5 C. Jumper Selectable for Celsius or Fahrenheit.
Software included.
|
Temperature
Controller,
VEK6002
Unlike a normal thermostat, this
device has two outputs, one for "high" alarm, e.g. to switch on the air conditioning, and one for "low" alarm, e.g. to switch on the central heating. Both alarms are adjustable independently, each with their own hysteresis. Sensor K6001 included.
Display from -40°F to 302°F. Resolution: ± 0.2°F. Alarm setting: from -58°F to 309°F.
|
Liquid
Level Controller,
VEK2639
This multifunctional device is easy to use in a variety of applications: 1) LED control of set fluid level: LOW, MIDDLE, HIGH; 2) Controller: the relay automatically switches a pump and/or valve to keep the fluid level between the LOW and HIGH marks; 3) Alarm: if the sensor detects a level which is too high or too low (selectable), the relay will operate a bell or other alarm device.
|