Impact of medium properties on droplet release in a highly parallel nanoliter dispenser
Pages 187-194
Oliver Gutmann, Remigius Niekrawietz, Ruben Kuehlewein, Chris P. Steinert, Bas de
Heij, Roland Zengerle and Martina Daub
Abstract
|
Demonstration for integrating capacitive pressure sensors with read-out circuitry on stainless steel substrate
Pages 195-204
Sung-Pil Chang and Mark G. Allen
Abstract
|
The optical mouse for vibratory motion sensing
Pages 205-208
T. W. Ng and K. T. Ang
Abstract
|
A non-silicon micro-machining based scalable fiber optic switch
Pages 209-214
Junfeng Bao, Zhonghui Cao, Ye Yuan and X. Wu
Abstract
|
Low temperature sintering behavior of B2O3 vapor in BaTiO3-based PTCR thermistors
Pages 215-218
Jianquan Qi, Wanping Chen, Hangyao Wang, Yu Wang, Longtu Li and Helen Lai Wah Chan
Abstract
|
Silicon grid devices for attachment of cultured fibroblast collagen lattices
Pages 219-223
Vincent Armbruster, Tijani Gharbi, Céline Viennet and Philippe Humbert
Abstract
|
Multimode waveguide mode surface plasmon coupling: a sensitivity and device realizability study
Pages 224-231
Peter Stöcker, Bernhard Menges, Uwe Langbein and Silvia Mittler
Abstract
|
Vibration measurement with a micromachined mirror in a very-short external cavity laser
Pages 232-240
Franck Chollet, Gopal M. Hegde, Zhang Xuming, Liu Aiqun and Anand Asundi
Abstract
|
Design and simulation of an angular-rate vibrating microgyroscope
Pages 241-256
S. Rajendran and K. M. Liew
Abstract
|
Design and fabrication of single-chip a-Si TFT-based uncooled infrared sensors
Pages 257-263
Liang Dong, Ruifeng Yue, Litian Liu and Su Xia
Abstract
|
Non-photolithographic pattern transfer for fabricating arrayed
three-dimensional microstructures by chemical anisotropic etching
Pages 264-271
Mitsuhiro Shikida, Michiaki Odagaki, Nobuo Todoroki, Masaki Ando, Yuji Ishihara, Taeko Ando and Kazuo Sato
Abstract
|
Ultrasonic transducers on base of thin plates and powder of ferrites
Pages 272-276
Valery Sarnatski
Abstract
|
A physical model for the interdigitated fuel drivability index sensor
Pages 277-283
Simon S. Wang, Han S. Lee, David K. Lambert and Yingjie Lin
Abstract
|
Heat-flux sensor to support transient thermal characterisation of IC packages
Pages 284-292
M. Rencz, E. Kollár and V. Székely
Abstract
|
Time domain simulation and measurements for piezoelectric bimorphs
Pages 293-303
A. T. Kollias and J. N. Avaritsiotis
Abstract
|
Advanced output chains for CMOS image sensors based on an active column sensor approach—a detailed comparison
Pages 304-311
Shai Diller, Alexander Fish and Orly Yadid-Pecht
Abstract
|
Exact box-car lifetime measurement of dye fluorescence
Pages 312-319
N. Danz
Abstract
|
Nonlinear behavior of piezoceramics and piezocomposites under various ac fields
Pages 320-328
C. P. Chong, W. P. Chen, H. L. W. Chan and P. C. K. Liu
Abstract
|
Design and evaluation of PZT thin-film micro-actuator for hard disk drives
Pages 329-335
Yang Jing, Jianbin Luo, Xiaoxing Yi and Xin Gu
Abstract
|
A methodology for analyzing the variability in the performance of a MEMS actuator made from a novel ceramic
Pages 336-344
J. S. Kong, D. M. Frangopol, M. Raulli, K. Maute, R. A. Saravanan, L. -A. Liew and R. Raj
Abstract
|
Self-sensing applications for electromagnetic actuators
Pages 345-351
Ben Hanson and Martin Levesley
Abstract
|
Anodic bonding characteristics of MLCA/Si-wafer using a sputtered Pyrex #7740 glass layer for MEMS applications
Pages 352-356
Gwiy-Sang Chung and Jae-Min Kim
Abstract
|
Effects of alcoholic moderators on anisotropic etching of silicon in aqueous potassium hydroxide solutions
Pages 357-368
Wen-June Cho, Wei-Kuo Chin and Ching-Tung Kuo
Abstract
|
|
|
Journal : SENSORS AND ACTUATORS A: PHYSICAL