Submicron giant magnetoresistive sensors for biological applications
Pages 1-6
D.K. Wood, K.K. Ni, D.R. Schmidt and A.N. Cleland
Abstract
|
Efficient modeling of a biaxial micromirror with decoupled mechanism
Pages 7-16
Yahong Yao, Xiaoping Zhang, Gaofeng Wang and Liji Huang
Abstract
|
SABCMS, a new approach to higher lateral resolution of laser probe measurement system
Pages 17-25
Weiqian Zhao, Jiubin Tan, Lirong Qiu and Peng Jin
Abstract
|
Effects of dimensional and material parameters and cross-coupling on FBG based shear force sensor
Pages 26-36
Rupali Suresh and Swee Chuan Tjin
Abstract
|
Single flexible ultrasound transducer for enhancement of permeability of silicone membrane
Pages 37-43
H.Y. Zhang and S.H. Yeo
Abstract
|
UV-laser assisted fabrication of Bragg sensor components in a planar polymer chip
Pages 44-52
C. Wochnowski, M. Abu-El-Qomsan, W. Pieper, K. Meteva, S. Metev, G. Wenke and F. Vollertsen
Abstract
|
Optic fiber-based dynamic pressure sensor for WIM system
Pages 53-58
Shenfang Yuan, Fahard Ansari, Xiaohui Liu and Yang Zhao
Abstract
|
In-line displacement sensor based on fiber-to-tapered planar waveguide coupler
Pages 59-63
Kwang Taek Kim and Seung Hwangbo
Abstract
|
Nonlinear mechanical effects in silicon longitudinal mode beam resonators
Pages 64-70
Ville Kaajakari, Tomi Mattila, Antti Lipsanen and Aarne Oja
Abstract
|
Triaxial fluxgate gradiometer of high stability and linearity
Pages 71-77
Jose M.G. Merayo, P. Brauer and F. Primdahl
Abstract
|
Micro-sized photo-detecting stimulator array for retinal prosthesis by distributed sensor network approach
Pages 78-87
Akihiro Uehara, Yi-Li Pan, Keiichiro Kagawa, Takashi Tokuda, Jun Ohta and Masahiro Nunoshita
Abstract
|
Tuning the spectral distribution of p–i–n a-SiC:H devices for colour detection
Pages 88-93
M. Vieira, P. Louro, A. Fantoni and M. Fernandes
Abstract
|
Acoustic near-field technique for characterization of bitumen and polymer processing
Pages 94-100
Abderrafi Ramdani, Mouncif Sidki, Hassan Rhmini and Jean-Yves Ferrandis
Abstract
|
Encapsulation of organic field effect transistors for flexible biomedical microimplants
Pages 101-109
Dara Feili, Martin Schuettler, Thomas Doerge, Sascha Kammer and Thomas Stieglitz
Abstract
|
Interferometric sensors for spectral imaging
Pages 110-114
Helmut Stiebig, Dietmar Knipp, Sameer R. Bhalotra, Helen L. Kung and David A.B. Miller
Abstract
|
Modeling of a capacitive probe in a polarizable medium
Pages 115-122
Karabi Biswas, Siddhartha Sen and Pranab Kumar Dutta
Abstract
|
Performance evaluation of lightweight piezo-composite actuators
Pages 123-129
K.Y. Kim, K.H. Park, H.C. Park, N.S. Goo and K.J. Yoon
Abstract
|
Planar Hall effect in Hall sensors made from InP/InGaAs heterostructure
Pages 130-133
M. Morvic and J. Betko
Abstract
|
Structure and characterization of a planar normally closed bulk-micromachined piezoelectric valve for fuel cell applications
Pages 134-141
Hengbing Zhao, Kevin Stanley, Q.M. Jonathan Wu and Eva Czyzewska
Abstract
|
Quartz crystal microbalance coated with carbon nanotube films used as humidity sensor
Pages 142-146
Yongsheng Zhang, Ke Yu, Rongli Xu, Desheng Jiang, Laiqiang Luo and Ziqiang Zhu
Abstract
|
Distributed measurement system based on networked smart sensors with standardized interfaces
Pages 147-153
Guangming Song, Aiguo Song and Weiyi Huang
Abstract
|
Numerical simulation and test of a UV-LIGA-fabricated electromagnetic micro-relay for power applications
Pages 154-162
John D. Williams, Ren Yang and Wanjun Wang
Abstract
|
Measurement of nanodisplacements and elastic properties of MEMS via the microscopic hole method
Pages 163-171
Sungwoo Cho, Jaime F. Cárdenas-García and Ioannis Chasiotis
Abstract
|
Fluidic encapsulation in SU-8 μ-reservoirs with μ-fluidic through-chip channels
Pages 172-183
A.J. Nijdam, A.H. Monica, A.P. Gadre, J.A. Garra, T.J. Long, C. Luo,
M.-C. Cheng, T.W. Schneider, R.C. White, M. Paranjape and J.F. Currie
Abstract
|
Modeling of a pre-strained circular actuator made of dielectric elastomers
Pages 184-192
Michael Wissler and Edoardo Mazza
Abstract
|
Manufacture of a nanotweezer using a length controlled CNT arm
Pages 193-198
Junsok Lee and Soohyun Kim
Abstract
|
A study of dynamic characteristics and simulation of MEMS torsional micromirrors
Pages 199-210
Jian Ping Zhao, Hua Ling Chen, Jian Ming Huang and Ai Qun Liu
Abstract
|
Industrial design of a centimetric “TWILA” ultrasonic motor
Pages 211-224
Lionel Petit and Paul Gonnard
Abstract
|
Mechanically amplified large displacement piezoelectric actuators
Pages 225-231
J. Juuti, K. Kordás, R. Lonnakko, V.-P. Moilanen and S. Leppävuori
Abstract
|
Enhancement of synthetic jets by means of an integrated valve-less pump: Part I. Design of the actuator
Pages 232-240
Zdeněk Trávníček, Alexander I. Fedorchenko and An-Bang Wang
Abstract
|
High isolation X-band MEMS capacitive switches
Pages 241-248
M. Tang, A.B. Yu, A.Q. Liu, A. Agarwal, S. Aditya and Z.S. Liu
Abstract
|
Study of a 2 × 2 MOEMS optical switch with electrostatic actuating
Pages 249-256
Dong-Ming Sun, Wei Dong, Guo-Dong Wang, Cai-Xia Liu, Xin Yan, Bao-Kun Xu and Wei-You Chen
Abstract
|
Decoupling loading effect in simultaneous sensing and actuating for dynamic measurement
Pages 257-265
Shih-Fu Ling, Xiaoyan Hou and Yi Xie
Abstract
|
Complete analytical modeling and analysis of micromachined thermoelectric uncooled IR sensors
Pages 267-276
C. Escriba, E. Campo, D. Estève and J.Y. Fourniols
Abstract
|
A hardware development for optical tomography system using switch mode fan beam projection
Pages 277-290
R. Abdul Rahim, K.S. Chan, J.F. Pang and L.C. Leong
Abstract
|
Reliability of anodically bonded silicon–glass packages
Pages 291-295
M.X. Chen, X.J. Yi, Z.Y. Gan and S. Liu
Abstract
|
|
|
Journal: SENSORS AND ACTUATORS A: PHYSICAL