1) Role of MEMS in Biomedical Application: A Review
Himani Sharma, P. A. Alvi, S. Dalela and J. Akhtar, pp.1-10
[Download]
2) Novel Pressure Sensor for Aerospace Purposes
T. Beutel, M. Leester-Schädel, P. Wierach, M. Sinapius and S. Büttgenbach, pp.11-19
[Download]
3) Design and Implementation of an Embedded Digital Throwing System Based on MEMS Multiaxial Accelerometer
Zhen Gao and Dan Zhang, pp.20-28
[Download]
4) On the Modeling of a MEMS Based Capacitive Accelerometer for Measurement of Tractor Seat Vibration
M. Alidoost, G. Rezazadeh, M. Hadad-Derafshi, pp.29-42
[Download]
5) Optimization of Contact Force and Pull-in Voltage for Series Based MEMS Switch
Abhijeet Kshirsagar, S. P. Duttagupta, S. A. Gangal, pp.43-47
[Download]
6) Fully on-chip High Q Inductors Based on Microtechnologies
Kriyang Shah, Nazuhusna Khalid, Jugdutt Singh, Hai P. Le, John Devlin and Zaliman Sauli, pp.48-60
[Download]
7) A Combined Thermo-Electrostatic MEMS-Based Switch with Low Actuation Voltage
Parisa Mahmoudi, Habib Badri Ghavifekr, Esmail Najafiaghdam, pp.61-70
[Download]
8) Output Force Enhancement of Scratch Drive Actuator in Low-Voltage Region by Using Flexible Joint
Shawn Chen, Chiawei Chang and Wensyang Hsu, pp.71-82
[Download]
9) Electroplated Nickel Micromirror Array
Mahmoud Almasri and Albert B. Frazier, pp. 83-91
[Download]
10) Pull-In Phenomenon Investigation in Nonlinear Electromechanical Coupled System by Distributed Model Frequency Analysis Method
Ahmadali Tahmasebi-Moradi, Fatemeh Abdolkarimzadeh and Ghader Rezazadeh, pp. 92-107
[Download]
11) Generic Compact Model of Double-Gate MOSFETs Applicable to Different Operation Modes and Channels
Xingye Zhou, Jian Zhang, Lining Zhang, Chenyue Ma, Xing Zhang, Jin He and Mansun Chan, pp. 108-115
[Download]
12) The Design, Fabrication and Characterization of Nematic Liquid Crystals Based Chemical and Biological Sensors
with Electroplated Microstructures
Jun Namkung and Robert G. Lindquist, pp.116-123
[Download]
13) Analytic Calculation of Forces and Torques on a Silicon Die under Fluidic Self-alignment
R. C. Woods, pp.124-134
[Download]
14) Silicon Die Self-alignment on a Wafer: Stable and Unstable Modes
Jean Berthier, Kenneth Brakke, François Grossi, Loïc Sanchez, Léa DI Cioccio, pp.135-150
[Download]
15) A Method to Improve the SGADER Process and Fabricate Ultra-thick Proof Mass Inertial Sensors under the Same DRIE Technique
Haifeng Dong, Jianli Li, pp.151-159
[Download]
16) Design of Novel Paper-based Inkjet Printed Rounded Corner Bowtie Antenna for RFID Applications
Yasar Amin, Julius Hållstedt, Hannu Tenhunen, Li-Rong Zheng, pp.160-167
[Download]
ERRATUM
17) Novel Sensors for Food Inspections
Mohd. Syaifudin Bin Abdul Rahman, Subhas C. Mukhopadhyay and Pak Lam Yu, pp. 1-40
[Download]
